Zanussi ZDT 6454 Cancelling the delay start, Interrupt a washing programme in pro- gress

Models: ZDT 6454

1 32
Download 32 pages 63.4 Kb
Page 7
Image 7
Cancelling the delay start

4.Press the button corresponding to the re- quired programme (see "Washing pro- grammes" chart).

When a programme has been selected the corresponding light will illuminate.

5.Close the dishwasher door, the pro- gramme starts automatically.

Setting and starting the programme with "delay start"

1.After having selected the washing pro- gramme, press the delay start button until the light corresponding to the chosen hours flashes (3h, 6h, 9h).

2.Close the dishwasher door, the countdown starts automatically.

3.The countdown will decrease with steps of 3 hours.

4.The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.

5.Once the delay start has elapsed the pro- gramme will start automatically.

Cancelling the delay start

To cancel a delay start in progress you have to reset the dishwasher.

Press simultaneously and keep pressed func- tion buttonsB and C until all programme button light are illuminated.

Cancelling a delay start involves also the can- celling of the washing programme set. In this case you have to set the washing programme again.

CAUTION!

Interrupt or cancel a washing programme in progress ONLY if it￿s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

Interrupt a washing programme in pro- gress:

Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrup- ted.

Cancel a washing programme in progress

Open the dishwasher door; press simulta- neously and keep pressed function but- tonsB and C until all programme button is illuminated. The washing programme has been cancelled. .

If a new washing programme is to be selec-

ted, check that there is detergent in the detergent dispenser.

Cancelling the "delay start"

To cancel a delay start in progress, open the door and press the delay start button, the corresponding light turns off.

close the door, the set washing programme will start automatically.

End of the washing programme

The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme.

Open the dishwasher door.

The end of programme indicator light is il- luminated.

The indicator light of the programme just ended will remain on.

Switch off the dishwasher by pressing the On/Off button.

7

Page 7
Image 7
Zanussi ZDT 6454 Cancelling the delay start, Interrupt a washing programme in pro- gress, End of the washing programme