The control panel
1.On/Off push button
2.Rinse aid indicator light
Illuminates when the rinse aid has run out and the rinse aid container requires refilling.
3. Salt indicator light
Illuminates when the salt has run out and the salt container requires refilling.
4. SID indicator light
Illuminates when | programme 2 | (Intensive 70°C) is |
selected. |
|
|
5.Digital display
6.Programme selection push button
For the setting of the wash programme refer to the "Washing programmes" chart.
7. Half load push button
This option is useful and economical when only a few dishes need washing.
Remember to load all the dishes into both baskets. When this option is selected the corresponding indicator light comes on.
This option is | not available with the following |
programmes: |
|
Programme 1 | (Rinse and Hold) |
Programme 8 | (Quick wash 50°C) |
Programme 11 | (Daily 30 I) |
Programme 12 | (Plate warmer) |
8. Drying options push button
By pressing this push button you can opt to: |
| ||
1. | reduce the temperature of the drying phase ( | Eco | |
| Dry ) |
|
|
2. | reduce the temperature of the water in the last rinse |
| |
| (No Dry | ) |
|
The indicator light corresponding to the selection will come on.
Eco Dry
No Dry
This option is not available with the following programmes:
Programme 1 | (Rinse and Hold) |
Programme 8 | (Quick wash 50°C) |
Programme 11 | (Daily 30 I) |
Programme 12 | (Plate warmer) |
If both indicator lights are off, the normal drying phase will be carried out.
9. Delay start push button
Allows the start of the programme to be delayed by a minimum of 1 hour, up to 12 hours.
10. Cancel push button (See page 11)
Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing.
Short "instruction accepted" signal
When any of the push buttons are pressed (except the
On/Off push button), a short audible signal informs you that the machine has accepted the instruction given.
Long "programme run" signal
A continuous audible signal informs you, once the door is closed, that the washing programme is starting.
Intermittent "end of programme" signal
An intermittent audible signal informs you that the wash programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm systems to help you determine the cause of any problems (see "Something not working").
An intermittent audible signal for about 15 seconds informs you that an alarm is activated.
To deactivate these audible signals, | press simultaneously | |||
and keep pressed both | Programme selection | and | Drying | |
options | push buttons for about 5 seconds. At the end of the 5 |
| ||
seconds | an intermittent audible signal informs you that the |
| ||
audible signals have been deactivated.
SO441
To reactivate these audible signals, | press simultaneously |
| ||
and keep pressed both | Programme selection | and | Drying | |
options | push buttons for about 5 seconds. At the end of the 5 |
| ||
seconds | an intermittent audible signal informs you that the |
| ||
audible signals have been reactivated.
Both operations (to deactivate or reactivate the audible signals) must be carried out before starting a washing programme; the setting will remain memorised after switching off the dishwasher.
4
