Instructions for the Installer
Technical data
|
|
|
|
|
|
|
| Model |
|
| ZERB 8643 |
| |
|
|
|
|
|
|
|
| Gross capacity (l) |
|
| Freezer: | 249 |
|
|
|
|
| Refrigerator: 109 |
| |
|
|
|
|
|
|
|
| Net capacity (l) |
|
| Freezer: | 245 |
|
|
|
|
| Refrigerator: 92 |
| |
|
|
|
|
|
|
|
| Width (mm) |
|
| 595 |
|
|
|
|
|
|
|
|
|
| Height (mm) |
|
| 1890 |
|
|
|
|
|
|
|
|
|
| Depth (mm) |
|
| 632 |
|
|
|
|
|
|
|
|
|
| Energy consumption (kWh/24h) |
|
| 0,96 |
|
|
| (kWh/year) |
|
| 350 |
|
|
|
|
|
|
|
|
|
| Energy class, according to EU standards |
|
| A |
|
|
|
|
|
|
|
|
|
| Freezing capacity (kg/24h) |
|
| 4 |
|
|
|
|
|
|
|
|
|
| Rising time (h) |
|
| 20 |
|
|
|
|
|
|
|
|
|
| Rated current (A) |
|
| 0,9 |
|
|
|
|
|
|
|
|
|
| Weight (kg) |
|
| 73 |
|
|
|
|
|
|
|
|
|
| Number of compressors |
|
| 1 |
|
|
|
|
|
|
|
|
|
Installing the appliance
Transportation, unpacking
It is recommended to deliver the appliance in original packaging, in vertical position
considering the protective warning on packaging.
After each transportation the appliance must not be switched on for approx. 2 hours.
Unpack the appliance and check if there are damages on it. Report possible damages immediately to the place you bought it. In that case retain packaging.
Cleaning
Remove every adhesive tape and everything else, which ensure the accessories not to move in the appliance.
Wash the inside of the appliance using lukewarm water and mild detergent. Use soft cloth.
After cleaning wipe out the inside of the appliance.
Class of climate | Ambient temperature |
|
|
SN | +10 ... +32 °C |
|
|
N | +16 ... +32 °C |
|
|
ST | +18 ... +38 °C |
|
|
If the ambient temperature goes below the lower data the temperature of the cooling compartment can go beyond the prescribed temperature.
If the ambient temperature goes beyond the upper data this means longer operating time of the compressor, breakdown in the automatic defrosting increasing temperature in the cooling compartment or increasing energy consumption.
Mount the spacers supplied in the plastic bag of the accessories. Hold the spacer as shown on the Fig., knock it home, then turn it by 90°. (Into the oval holes of back side of the appliance.)
Placement
The ambient temperature has an effect on the energy consumption and proper operation of the appliance. When placing, take into consideration that it is practical to operate the appliance between ambient temperature limits according to the climate class that is given in the chart below and can be found in the data label.
15 |
