Door reversal
1.Unplug the appliance from the power supply before carrying out the following operations.
2.Remove the feet (3).
3.Unscrew the bottom hinge (1).
4.Remove the fridge door by releasing it from the middle hinge (H).
5.Unscrew the middle hinge.
6.Remove the freezer door by releasing it from the top hinge pin (G).
7.Remove the pin (G) from the top hinge, then mount these on the opposite side.
8.Refit the freezer door, after having removed the plugs(I) which must be refitted on the other side.
9.Replace the middle hinge to the left hand side.
10.Refit the fridge door and bottom hinge (1) on the opposite side.
11.Refit the feet (3) on the opposite side.
12.The doors can be aligned by adjusting the middle hinge.
13.The middle hinge can be adjusted horizontally, with the help of a tool, after having slackened the two screws.
Important
After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdryer on a low setting.
3 |
1 |
2 |
D715 PIED/M |
H |
G |
I |
I |
I |
16
