Electrical Connection
WARNING
THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed.
If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13amp socket in another part of your home.
Important
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow - Earth
Blue- Neutral
Brown - Live
GREEN & YELLOW
13 AMP. FUSE
13 AMP |
| BROWN |
| BLUE |
D207 | CORD CLAMP |
|
If you fit your own plug, the colours of the wires in the mains lead of your appliance, may not correspond with the markings identifying the terminals in your plug, proceed as follows:
Connect the Green and the Yellow (earth) wire to the terminal in the plug which is marked with the letter
ÇEÈ or the earth symbol 
, or coloured green and yellow.
Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter ÇNÈ or coloured black.
Connect the brown (live) wire to the terminal in the plug which is marked with the letter ÇLÈ or coloured red.
The plug moulded onto the lead incorporates a fuse. For replacement, use a 13amp BS1362 fuse. Only ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.
This appliance complies with the following E.E.C. Directive:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent amendments.
-87/308 of 2.6.87 (Radio Interference Suppression) and subsequent amendments.
-89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent amendments.
Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of breakdown.
14
