Making ice cubes
A plentiful supply of ice can be made in the two trays located above the ice servery. Fill the trays 3/ 4 full to allow the ice to expand.
To dispense the ice, fully turn the dial as shown in Fig. 11.
The cubes will fall easily from the trays, into the servery below.
Never consume
Fig. 11
3P 19
Overtemperature alarm and memory device
In the event of an abnormal temperature rise inside the freezer compartment (e.g. power cut) warning light (H) will start to flash.
The alarm will continue to flash even after the temperature has returned to normal; it is therefore quite possible to find that the freezer temperature indicator may actually be showing the normal storage temperature values: flashing of warning light (H) indicates that there has been a problem some time previously.
To stop it flashing press button (G).
As soon as this is done, the alarm function is reset and the hottest temperature reached within the compartment, which has been memorised by the device, flashes for 10 seconds on indicator (D).
After 10 seconds, indicator (D) resumes its normal thermometer function.
Defrosting the appliance
Defrosting of the freezer. Superchill and refrigerator is automatic.
The water is discharged, via pipes, into a tray located at the back of the appliance, above the compressor, where it evaporates.
Fig. 12
3P 18
14
