Technical Specifications

Model

Volume (gross)

Volume (net)

Height with rollers

Width

Depth

Weight

Energy consumpt./24h

Freezing capacity

Hold-over time

Rated power

litres

litres

cm

cm

cm

kg

kWh

kg/24h

hours

W

ZFC 177 C

500

495

87,6/88,3

160

66,5

66

1,609

20

32

130

this appliance complies with the following EC Directives:

-73/23/EEC of 19. 02. 1973 - Low-Voltage Directive

-89/336/EEC of 03. 05. 1989 (including Amendment Directive 92/31/EEC - EMC Directive. Some of the models are not available in all countries.

Testing has been carried out in accordance with ISO 5155 regarding the determination of freezer capacity, energy consumption and hold-overtime. Information for test institute: A plan of the positioning of test packages may be obtained directly from the manufacturer.

Installation

Positioning

Place the freezer horizontally on a firm surface, resting on all four wheels. Use a wooden block or similar object to compensate for any bumps/holes in the floor's surface.

The room should be dry and adequately ventilated.

Temperatures of the external environment have an impact on the energy consumption of the freezer. Therefore:

-do not place the freezer in a position exposed to sunshine or beside a radiator oven, or any other source

of heat.

- position it where the temperature of the environment corresponds to the climatic classification for which the freezer was designed.

Climatic classification Ambient temperature limits

 

From to

 

SN

+10 to +32

C

N

+16 to +32

C

ST

+18 to +38

C

T

+18 to +43

C

If the freezer has been handled standing on end, it should be allowed to stand in the normal position for about 12 hours before switching it on.

Ensure that the appliance is installed where it is easily accessible for the engineer in the event of a breakdown.

14

Page 14
Image 14
Zanussi ZFC 177 C Technical Specifications, Installation, Heat, Climatic classification Ambient temperature limits