CONSERVATION

In the interests of the Environment:

For maximum efficiency:

When disposing of your old fridge, freezer or fridge/ freezer.

Help to keep your country tidy – use authorised disposal sites for your old appliances.

Make sure that the appliance is cleaned properly.

Make sure that the door is closed properly.

Do not position the appliance near to sources of heat.

Do not over-fill your appliance, air MUST be allowed to circulate.

INSTALLATION

Warning

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Depending upon the position you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal directions” paragraph.

Positioning

This appliance is designed to operate in ambient temperatures between 10°C (50°F) and 32°C (90°F). It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a cooker or other sources of direct heat, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (Fig. 1-A). Ideally, the appliance should not be positioned beneath overhanging furniture (Fig. 1-B).

 

Fig. 1

100 mm

 

A

B

10 mm

10 mm

NP005

 

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT

install in places with restricted ventilation. Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a spanner (see Fig. 2).

Fig. 2

D200

Before using

Remove all securing tapes. Wash inside the appliance with lukewarm water and a little bicarbonate of soda (one teaspoonful to one quart of water). Do not use soap or detergent as the smell might linger. Dry thoroughly.

Rear spacers

The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.

Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in Fig. 2a. Then turn them through 45° (arrow (A) vertical) until they lock into place.

Fig. 2a

A

45°

D060

4

Page 4
Image 4
Zanussi ZFC 50/17 AL manual Conservation, Installation

ZFC 50/17, ZFC 50/17 AL specifications

The Zanussi ZFC 50/17 and ZFC 50/17 AL are upright freezers designed to offer reliable performance and efficient cooling solutions for households and small businesses.

One of the defining features of both models is their generous storage capacity, providing ample space for frozen goods. With a net capacity of approximately 150 liters, these freezers can easily accommodate everything from bulk purchases to family-sized meals, making meal planning and storage convenient for busy lifestyles.

Energy efficiency is another key highlight of the Zanussi ZFC 50/17 and ZFC 50/17 AL. Both freezers are equipped with energy-efficient technology that helps to lower electricity bills while minimizing environmental impact. They typically have an energy rating of A+, ensuring that they consume less energy compared to older, less efficient models.

The design of the Zanussi units emphasizes user-friendliness and practicality. The adjustable shelving allows for flexible organization of items, enabling users to customize their storage according to their needs. Additionally, the transparent drawers offer visibility for easy access to food items. This arrangement simplifies meal prep and helps to reduce waste since users can easily see what they have on hand.

On a technological front, both models feature a fast-freezing function that ensures food is quickly frozen to retain its freshness and nutritional value. This feature is particularly useful when freezing large quantities of food at once. The control settings are straightforward, featuring a user-friendly thermostat that allows for precise temperature adjustments to suit the user’s preferences.

In terms of build quality, the Zanussi ZFC 50/17 and ZFC 50/17 AL boast a robust construction designed to withstand daily use. The freezer door is reversible, providing flexibility in installation, which can be a significant advantage in smaller spaces.

Moreover, the low-noise operation of these freezers ensures that they can fit seamlessly into any environment without causing disturbances. Overall, the Zanussi ZFC 50/17 and ZFC 50/17 AL are excellent choices for those seeking a reliable and efficient solution for freezing food, with a blend of practicality, performance, and modern design. With their energy efficiency, user-friendly features, and generous storage capacity, these models ensure that users can effectively manage their frozen goods while benefiting from quality performance.