Electrical Connections
Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.
THIS HOB MUST BE EARTHED.
Electrical Requirements
The manufacturer declines any liability should these safety measures not be observed.
This hob is designed to be connected to a 230 V 50 Hz AC electrical supply.
Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book.
The hob is supplied with a 3 core flexible |
| Neutral | |||
|
|
| |||
supply cable. |
|
|
|
| |
This has to be provided with a proper plug, |
|
|
| ||
able to support the load marked on the | Earth (yellow/green) | ||||
identification plate. To connect |
|
|
|
| |
|
|
|
| ||
the plug to the cable, follow the |
|
|
|
| |
Min. size Cable/flex | Cable / flex type | Fuse | |||
recommendation given in Figu- | |||||
re. The plug has to be fitted in | 0.75 mm2 |
| H05 | 3 A | |
a proper socket. |
|
|
|
| |
In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must be used.
Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code:
Green and Yellow | - Earth |
Blue | - Neutral |
Brown | - Live |
)— Connect the green and yellow (earth) wire to the terminal in the plug which is marked with the letter 'E' or the earth symbol 
or coloured green and yellow.
20
