Charcoal filter

The charcoal filter should only be used if you want to use the hood in recirculation mode.

To do this you will need an original charcoal filter (available from your local Service Force Centre).

Cleaning/replacing the charcoal filter

The saturation of the activated charcoal occurs after more or less prolonged use, depending on the type of cooking and the regularity of cleaning of the grease filter.

In any case it is necessary to replace the cartridge at least every four mounths (or when the filter saturation indication system – if envisaged on the model in possession – indicates this necessity).

Fitting

Remove the grease filters.

Apply the filter first in front and then behind fixing it in position with the two knobs (g). Refit the grease filters.

g g

g

To remove

Remove the filter turning the knobs that fix it to the hood 90°(g).

Always specify the hood model code number and serial number when ordering replacement filters. This information is shown on the rating plate located on the inside of the unit.

The charcoal filter can be ordered from your local Service Force Centre.

11

Page 11
Image 11
Zanussi ZHC 9254X user manual Charcoal filter, Cleaning/replacing the charcoal filter, Fitting, To remove