Installation
Mounting accessories included
1deflector (+ spacers adapter)
2metal screws 3,5 x 13 (to fix spacers adapter to
deflector).
2metal screws 3 x 9 (to fix upper chimney section)
12metal screws 3,5 x 9,5 (6 to fix motor unit to lower part of the hood, 4 to fix deflector to
chimney support, 2 to fix lower chimney section)
1 chimney support (3 pieces to assemble)
4metal screws 4 x 8 (to assemble the chimney support)
5
5wall plugs Ø 8 mm (for wall mounting)
1allen spanner (for TORX 10/20 screws)
1support bracket
Assembling the chimney flue support/bracket (3 parts):
The three parts should be fixed with 4 screws, the support extension is adjustable and should correspond to the internal width of the telescopic chimney flue. Fig. 6.
Assembling the deflector
(3 parts – only for recirculation mode):
The three parts should be fixed with 2 screws, the deflector extension is adjustable and should correspond to the width of the chimney flue support, to which it is then fixed. Fig. 6.
|
| = | X |
|
| = | |
| G |
| |
| F |
| |
= | = |
| |
X |
|
| |
| X |
|
|
|
|
| G |
|
| F |
|
| H |
|
|
Fig. 6
12
