MAINTENANCE
Unplug the appliance before carrying out any maintenance operation.
Clean the interior periodically with lukewarm water and some sodium bicarbonate; the cabinet exterior with a silicone wax spray; the condenser and the motor compressor with a brush or a vacuum cleaner.
During periods when the appliance is not in use, take the following precautions:
unplug the appliance from the power supply; remove all foodstuffs from the appliance; clean the interior and all accessories;
leave the doors ajar to allow air to circulate inside the cabinet so as to prevent the formation of unpleasant odours.
Replacing the interior light bulb
The light inside the refrigerator compartment is easy to get at through the opening in the light holder.
If the light does not go on when the door is open, check that it is screwed into place properly.
If it still does not light up, change the bulb.
The rating is shown on the light bulb cover.
Fig. 16
D025
SERVICING
If the appliance is not functioning properly check that:
the plug is firmly in the wall socket and the mains power switch is on;
there is no power failure; the control knob is in the right position.
If there is water on the fridge bottom, make sure the defrost water drain hole is not clogged (Fig. 14).
To do this, use the cleaner provided which can be found in the drain hole.
If your appliance is still not working properly after making the above checks, contact your local dealer or the nearest service center.
To obtain fast service, it is essential that when you apply for it you specify the model and serial number of your appliance which can be found on the warranty certificate or inside the appliance on the rating plate.
193
