C |
D |
E |
B |
4.Snap vent grill (B) and hinge cover (E) into position.
Apply blanking covers
Ha |
Hc |
7.Fix cover (Hc) on guide (Ha) until it clips into place.
HaHb
Hc
Hd
PR266
5.Separate parts Ha, Hb, Hc, Hd as shown in the figure.
ca. 50 mm |
|
| 90° |
| 21 m |
| m |
| 90° |
ca. 50 mm | 21 m |
| |
| m |
6.Place guide (Ha) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied.
8mm |
Ha |
Hb |
PR167 |
8.Open the appliance door and the furniture door at 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes as indicated in the figure.
8mm |
K |
Ha |
PR167 |
9.Remove the squares and mark a distance of 8 mm from the outer edge of the door where the nail must be fitted (K).
17
