16
The water inlet filters
If your water is very hard or contains traces of lime
deposit, the water inlet filters may become clogged.
It is therefore a good idea to clean them from time to
time.
Turn off the water taps. Unscrew the water inlet hoses.
Remove and clean the filters using a hard bristle brush.
Replace the filters and tighten up the inlet hoses.
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
lTurn off the water taps.
lUnscrew the inlet hoses.
lUnhook the drain hose from the rear support and
position the end of this hose and that of the inlet
hoses in a bowl. Run the draining programme.
lDisconnect the appliance.
lScrew the inlet hoses and reposition the drain hose.
lWhen you intend to start the machine up again,
make sure that the room temperature is above 0°C.
P0041