Important Safety Instructions

These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or these warnings contact the Customer Care Department.

Prior to installation

Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer.

Installation

This appliance is heavy. Care should be taken when moving it.

It is dangerous to alter the specifications or attempt to modify this product in any way.

Ensure that the appliance does not stand on the electrical supply cable. If the supply cable is damaged, it must be replaced by a cable available from your local Service Force Centre.

Make sure that the power plug has not been squashed or damaged during transit.

-A damaged power plug may overheat and cause a fire.

As you unpack the appliance, check carefully for any signs of transit damage.

Do not place heavy articles or the fridge/freezer itself on the power cord.

-There is a risk of a short circuit and fire.

Do not remove the power cord by pulling on its lead, particularly when the fridge/freezer is being pulled out of its niche.

-Damage to the cord may cause a short-circuit, fire and/or electric shock.

-If the power cord is damaged, it must be replaced by a certified service agent or qualified service personnel.

If the power plug socket is loose, do not insert the power plug.

- There is a risk of electric shock or fire.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Parts which heat up should not be exposed. Whenever possible, the back of the appliance should be close to a wall, but leaving the required distance for ventilation, as stated in the installation instructions.

The appliance should be left for 2 hours after installation before it is turned on, in order to allow the refrigerant to settle.

Child Safety

Do not allow children to tamper with the controls or play with the product.

Keep packaging materials away from children to prevent the risk of suffocation!

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Safety precautions for isobutane

Warning

The refrigerant isobutane (R 600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance.

During Use

This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs. It is not intended for commercial or industrial use.

Containers with flammable gases or liquids can leak at low temperatures. Do not store any containers with flammable materials, such as spray cans, fire extinguisher refill cartridges etc. in the appliance.

Frozen food should not be refrozen once it has thawed out.

Do not place carbonated or fizzy drinks in the freezer compartment.

Ice lollies can cause 'frost/freezer burns' if consumed straight from the freezer.

Do not remove items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.

Bottles and cans must not be placed in the freezer compartment they can burst when the contents freeze.

Manufacturers' recommended storage times should be adhered to. Refer to relevant instructions.

Maintenance and Cleaning

Before cleaning, always switch off the appliance and disconnect from the electrical supply.

When unplugging always pull the plug from the mains socket, do not pull on the cable.

Servicing

This product should be serviced by an authorised engineer and only genuine spare parts should be used.

Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre.

At the end of the Appliance Life

When disposing of your appliance use an authorised disposal site.

Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped inside.

The Appliance and the Environment

This appliance does not contain gases which could damage the ozone layer.

Avoid damaging the cooling unit.

The packaging used on this appliance marked with the symbol is recyclable.

Keep this instruction book for future reference and ensure it is passed on to any new owner.

ZNB 404 S, ZNB 404 W specifications

The Zanussi ZNB 404 W and ZNB 404 S are premium refrigerator models designed to meet the demands of modern households. Both models exemplify the perfect balance of style, functionality, and technological innovation.

One of the standout features of the Zanussi ZNB 404 W, which boasts a sleek white finish, and the ZNB 404 S with its stainless steel aesthetic, is their spacious interiors. Both models offer a total storage capacity of 300 liters, making them ideal for families and individuals who require ample space for groceries and perishables. The adjustable shelves and door bins provide flexibility in organizing food items, ensuring easy access and maximized storage efficiency.

In terms of cooling technology, the Zanussi ZNB 404 series integrates advanced No Frost technology. This innovative feature prevents ice build-up, eliminating the need for manual defrosting. Not only does this save time, but it also ensures consistent temperature distribution throughout the fridge, preserving the freshness of food for longer periods.

The energy efficiency of the ZNB 404 models is another highlight, with an impressive Energy Efficiency Class of A++. This means they consume less energy compared to conventional refrigerators, leading to lower electricity bills while being environmentally friendly.

Both models come equipped with an electronic temperature control system featuring a digital display, allowing for precise temperature adjustments based on the storage requirements of different food items. Additionally, the MultiFlow cooling system ensures that air circulates evenly within the fridge, helping to maintain stable temperatures across all shelves.

The Zanussi ZNB 404 W and ZNB 404 S also prioritize user convenience with their reversible door feature, which allows users to customize the door swing direction according to their kitchen layout. Furthermore, the models include bright LED interior lighting for enhanced visibility, making it easier to find items in the fridge.

Overall, the Zanussi ZNB 404 W and ZNB 404 S refrigerators embody a combination of practical features, cutting-edge technology, and stylish design, making them an excellent addition to any kitchen. With their focus on efficiency, convenience, and storage capability, these models are sure to satisfy the needs of various users while adding a touch of sophistication to home decor.

Zanussi ZNB 404 S, ZNB 404 W manual Important Safety Instructions

Models: ZNB 404 S ZNB 404 W