Zanussi ZOB10501 What to do if…, Installing the door and the glass panel, Problem, Possible cause

1 2

7Carefully lift (step 1) and remove (step 2) the glass panel.

Clean the glass panel with water and soap. Dry the glass panel carefully.

Installing the door and the glass panel

When the cleaning is completed, install the glass panel and the oven door. Do the above steps in the opposite se- quence.

The screen-printing zone must face the inner side of the door. Make sure that after the installation the surface of the glass panel frame on the screen-printing zones is not rough when you touch it.

Make sure that you install the internal glass panel in the seats correctly. Refer to the illustration.

What to do if…

Warning! Refer to "Safety information" chapter.

Problem

The appliance does not operate.

The appliance does not operate.

The oven lamp does not operate.

Steam and condensation collect on the food and in the oven.

Possible cause

The appliance is not activated.

The fuse in the fuse box is released.

The oven lamp is defective.

You left the dish in the oven for too long.

Remedy

Activate the appliance. Refer to the chapter "Daily Use".

Do a check of the fuse. If the fuse is released more than one time, contact a qualified electrician.

Replace the oven lamp.

Do not keep the dishes in the oven for longer than 15-20 minutes after the cooking ends.

If you cannot find a solution to the problem yourself, con- tact your dealer or the service centre.

We recommend that you write the data here: Model (MOD.)

Product number (PNC) Serial number (S.N.)

The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity.

.........................................

.........................................

.........................................

www.zanussi.com 11