Zanussi ZOB 330 manual End of cooking function, Cooking duration and End Cooking time combined

“End of cooking” function

With this function, you can set the oven to switch off automatically when a programmed end of cooking timeisover.Placefoodintheoven,selectacooking functionandadjustthecookingtemperature.Press

button repeatedlytoselect the“Endofcooking”

function.Therelevantpilotlampwillstartflashing. Then, proceed as follows:

To set the End of cooking time:

1.Press button “ ” or “ ”.

2.After the setting is carried out, wait for 5 seconds: the “End of cooking” pilot lamp will come on and the display will revert to the time of day.

3.When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, and the pilot lamp will start flashing. Turn the oven function and the thermostat control knob to zero.

To switch off the acoustic alarm, press any button. NOTE: turning the acoustic alarm off will reset the oven to manual, and if the oven function and the thermostat knobs are not set to zero the oven will start to heat again.

To cancel the End of cooking time:

1. Press button repeatedly to select the “End

of cooking” function. The relevant pilot lamp will flash and the display will show the programmed End of cooking time.

2.Press button “ ” until the display shows the current time of day. The programmer will beep and the pilot lamp will go out.

“Cooking duration” and “End

of cooking time” combined

The functions “Cooking duration” and “End of cookingtime”canbeusedsimultaneouslytosetthe oventoswitchonandoffautomaticallyatalatertime.

12