The appliance is supplied with a 13 amp plug fitted
2. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
Warning! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure
that it is disposed of safely.
Rear spacers and levelling
2
1
3
Removing the shelf holders
Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transpor- tation.
To remove them proceed as follows:
1. Move the shelf hold- ers in the direction of the arrow (A).
2. Raise the shelf from the rear and push it forward until it is freed (B).
3.Remove the retainers
(C).
In the bag with the docu- mentation, there are two spacers which must be fit- ted as shown in the figure. Slacken the screws and in- sert the spacer under the screw head, then tighten again the screws.
When placing the appli- ance ensure that it stands level. This can be ach- ieved by two adjustable feet at the bottom in front.
Door reversibility
Warning! Before carrying out any operations, remove the plug from the power socket.
Important! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations.
m1 m2
1
m5 m6
m3 m4
8
