INSTALLATION

Warning

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal directions” paragraph.

Positioning

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N +16°C to + 32°C

ST +18°C to + 38°C

T +18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

mm100

A mm10 NP002

B

10 mm

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath.

Rear spacers

The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.

Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in the diagram. Then turn them through 45° (arrow (A) vertical) until they lock into place.

DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool ( see figure).

A

45°

PR60

D200

14

Page 13 Page 15
Page 14
Image 14
Zanussi ZRB 2625 S manual Installation, Positioning, Rear spacers
Page 13 Page 15

ZRB 2625 S specifications

The Zanussi ZRB 2625 S is a contemporary refrigerator that combines a sleek stainless-steel finish with advanced cooling technology, making it an ideal choice for modern kitchens. This appliance is designed to meet the demands of everyday life while ensuring optimal food preservation.

One of the key features of the Zanussi ZRB 2625 S is its impressive storage capacity. With a total net capacity of around 260 liters, this refrigerator provides ample space for your groceries, ranging from fresh produce to frozen items. Its well-organized layout includes adjustable shelves, allowing users to customize the interior to accommodate larger items or to create more space as needed.

In terms of cooling technology, the Zanussi ZRB 2625 S employs No Frost technology, which eliminates ice buildup in the freezer compartment. This feature not only saves you the hassle of manual defrosting but also ensures even temperature distribution, maintaining the ideal environment for food preservation. As a result, your frozen items remain accessible, and your energy consumption is minimized.

The refrigerator compartment is equipped with a built-in MultiFlow system, which enhances cooling performance. This technology ensures that cool air circulates evenly throughout the fridge, preventing temperature fluctuations and keeping your food fresher for longer. It also helps in maintaining humidity levels, which is essential for preserving the quality of fruits and vegetables.

Another notable characteristic of the Zanussi ZRB 2625 S is its energy efficiency. With an A+ energy rating, this appliance is designed to consume less power while delivering excellent performance. This not only helps reduce your electricity bills but also contributes to a more sustainable household.

The fridge comes with adjustable shelves made of sturdy materials, ensuring longevity, and is designed with clear storage bins that facilitate easy visibility of contents. The door features several compartments, perfect for storing bottles and jars, providing the ultimate convenience at your fingertips.

Safety features also play a significant role in the design of the Zanussi ZRB 2625 S. The appliance includes a robust door seal that prevents air leaks, ensuring food stays fresh and energy consumption is kept to a minimum. Additionally, the appliance operates quietly, making it a perfect fit for any home environment.

In summary, the Zanussi ZRB 2625 S stands out as a highly functional and stylish refrigerator. Combining innovative technologies with user-friendly design elements, it meets the needs of modern households while promoting energy efficiency and food safety. This refrigerator is not just a kitchen appliance; it's a commitment to quality and convenience in food storage.
Top Page Image Contents