Fit the refrigerator door to the upper door hinge pin (d) then slightly tilting both doors fit the pin of the double door hinge (m) into the left drill hole of the refrigerator door.
Opening both doors fix the double door hinge onto the left side using the screws (2 pieces) (c). Do not forget to replace the plastic spacer (b) under the hinge. Be careful that the door edges are parallel with the edge of the mantle.
Put the appliance into its location, set it level, and apply voltage to it.
In case you do not want to perform the procedures above, |
|
please contact your local Service Force Centre. | fig. 3. |
The engineer will carry out the door reversal at your cost. |
|
19
