Location
The appliance should be installed well away from sour- ces of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appli- ance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, howev- er, the appliance should not be positioned below over- hanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet.
If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the shelves can be removed.
Warning!
It must be possible to dis- connect the appliance from the mains power supply; the plug must therefore be easily accessible after in- stallation.
min.100 mm |
15 mm |
15 mm |
Door reversibility
Important! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations.
2
1
3
To change the opening direction of the door, do these steps:
1.Remove the plug from the power socket.
2.Open the door of the freezer. Loosen the hinge.
3.Remove the doors by pulling them slightly and remove the hinge.
4.On the opposite side, re- move the hole covers.
5.Unscrew both adjusta- ble feet and the screws of the bottom door hinge. Re- move the bottom door hinge and install it on the opposite side.
7
