Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

20

Page 19 Page 21
Page 20
Image 20
Zanussi ZSF 4111 Water outlet hose connection, Electrical connection, Green and Yellow Earth Blue- Neutral Brown- Live
Page 19 Page 21

ZSF 4111 specifications

The Zanussi ZSF 4111 is a highly efficient and compact dishwasher designed for households seeking a blend of performance and convenience. With its sleek design and modern features, this appliance serves to simplify daily dishwashing tasks while ensuring optimal cleanliness and efficiency.

One of the standout features of the ZSF 4111 is its impressive energy efficiency rating. This model boasts an A++ rating, meaning it consumes less electricity compared to standard dishwashers. This not only helps the environment by reducing energy consumption, but it also saves you money on utility bills over time.

The ZSF 4111 is equipped with various washing programs, offering users flexibility depending on their needs. These include a quick wash cycle that gets dishes clean in under 30 minutes, ideal for those times when you need clean plates in a hurry. The eco-friendly washing option ensures that you’re not only saving on energy but also on water, making it a environmentally responsible choice for eco-conscious consumers.

This model can accommodate up to 10 place settings, making it perfect for smaller families or individuals. The adjustable racks allow for the optimal arrangement of dishes, pots, and utensils, maximizing space efficiency and ensuring thorough cleaning even for larger items. Additionally, the upper basket can be adjusted to create more room for taller items below, enhancing its adaptability to various loads.

Another innovative feature of the Zanussi ZSF 4111 is its noise level of just 49 decibels, making it one of the quieter models available. This means it can operate quietly in the background without disrupting your daily activities or evening relaxation.

Furthermore, the dishwasher incorporates a delay start feature, granting users the flexibility to schedule washing cycles during off-peak hours or when it’s most convenient. This ensures that the user can run the dishwasher overnight or during the day while they are out, without worrying about noise or power usage during peak times.

Overall, the Zanussi ZSF 4111 combines practicality with advanced technology, providing an excellent solution for efficient dishwashing. Its energy-saving capability, versatile wash programs, space-efficient design, and quiet operation make it a valuable addition to any kitchen, catering to the busy lifestyles of modern households. With the ZSF 4111, you can enjoy clean dishes with minimal effort, all while being kind to the planet and your wallet.
Top Page Image Contents