Manuals / Zanussi / Kitchen Appliance / Dishwasher

Zanussi ZSF 4111 manual Hints for test centres, Cup racks position A

Models: ZSF 4111

1 24

Page 21

Hints for test centres

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart).

Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart).

	Load:			9 standard place settings

	Rinse aid setting:			position 4 (Type III)

	Detergent dosage :			5 g + 20 g (Type B)

Arrangement upper basket	Arrangement upper basket
Arrangement upper basket	Arrangement upper basket	Arrangement lower basket
without smaller bowl	with smaller bowl	Arrangement lower basket
without smaller bowl	with smaller bowl
and salad-bowl	and salad-bowl

Arrangement cutlery basket

Cup racks: position A

Page 21

Image 21

Zanussi ZSF 4111 manual Hints for test centres, Cup racks position A

Contents

DISHWASHER ZSF Instruction Book152963 89/0 Technical specifications ContentsInstallation Safety instructionsChild safety DisposalThe control panel Description of the applianceControl panel Rating platePage a Setting manually Prior to using for the first timeb Setting electronically The dishwasher must be switched offTo fill Filling with dishwasher saltRinse aid Adjusting the doseFilling with rinse aid Deactivation/activation of the dosage of rinse aidLoading cutlery and dishes In daily useThe lower basket The cutlery basketThe upper basket Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsSpecial advice General adviceDifferent kinds of detergent Detergent tabletsProgramme Washing programmesEnergy Water6. To interrupt or cancel a washing programme in progress 5. Setting and starting the programmeTo cancel a washing programme in progress Starting a washing programmeCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationthere are problems when operating the dishwasher a flashing fault code appearsFault code / malfunction Solutionsthe wash results are not satisfactory The dishes are not cleanThe dishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care Department08705 Standard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsFitting under a counter Installation instructionsLevelling Water supply connectionsElectrical connection Water outlet hose connectionCup racks position A Hints for test centresPage Page From the Electrolux Group. The world’s No.1 choice Electrolux plc06/04 Subject to change without notice