Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

20

Page 20
Image 20
Zanussi ZSF 4112 Water outlet hose connection, Electrical connection, Green and Yellow Earth Blue- Neutral Brown- Live

ZSF 4112 specifications

The Zanussi ZSF 4112 is an innovative built-in dishwasher designed to meet the needs of modern households while delivering outstanding performance and efficiency. This model blends functionality with style, making it an excellent addition to any kitchen setup.

One of the standout features of the Zanussi ZSF 4112 is its energy efficiency. With an A+ energy rating, this dishwasher is designed to consume less electricity, ultimately saving you money on your utility bills and reducing your environmental footprint. It also offers a low water consumption rate, which is advantageous for sustainability-conscious consumers.

The ZSF 4112 is equipped with multiple wash programs to accommodate various dishwashing needs. Whether you're dealing with heavily soiled pots and pans or delicate glassware, this dishwasher has a program to suit your requirements. The Quick Wash program is especially useful for those times when you’re in a hurry, delivering clean dishes in a fraction of the usual time without compromising on results.

One of the most convenient features of this appliance is its adjustable racks, which allow you to customize the interior space according to your needs. The upper rack can be easily raised or lowered to create room for larger items on the bottom shelf. Moreover, the dishwasher includes a cutlery basket that keeps your utensils organized and provides optimal cleaning performance.

The Zanussi ZSF 4112 also emphasizes quiet operation, making it ideal for open-plan living spaces. Its noise level is impressively low, allowing you to run the dishwasher even during the night without disturbing your household.

Technologically, this model comes with a variety of smart features. The Delay Start option lets you plan your wash cycles around your schedule, allowing the dishwasher to run at a time that is most convenient for you. This means you can take advantage of off-peak electricity rates or ensure that your dishes are cleaned just before dinner.

In terms of build and design, the Zanussi ZSF 4112 boasts a sleek and modern appearance that can seamlessly blend with other kitchen appliances. It features an intuitive control panel, making it easy to navigate through different settings.

In summary, the Zanussi ZSF 4112 is a comprehensive dishwasher that combines efficiency, versatility, and ease of use. With its various wash programs, adjustable racks, and energy-saving capabilities, it stands out as a reliable choice for any busy household looking for top performance in their dishwashing appliance.