D824/D1624 Quick Operation Guide

Connecting a analog mixer

The D824 should connect to an "8 tape in/8 buss (group) out" or "8-tape in/4 buss (group) out" analog mixing console.

The D1624 should connect to an "16 tape in/8 buss (group) out" or "8 tape in/4 buss (group) out" analog mixing console. See the following connection examples for both cases.

<Note>

Be sure to turn off the power to all devices before connecting the mixing console.

Connections when using the D824

Connecting a mixer that has eight TAPE INs and eight BUSS OUTs (or GROUP OUTs)

Connect TAPE INs 1-8 of the mixer to ANALOG OUTs 1- 8 of the D824, and connect BUSS OUTs (GROUP OUTs) 1-8 to ANALOG INs 1-8 of the D824.

With this example, you can make simultaneous eight- track recordings.

D824

Analog mixer

Connecting a mixer that has eight TAPE INs and four BUSS OUTs (or GROUP OUTs)

Connect TAPE INs 1-8 of the mixer to ANALOG OUTs 1- 8 of the D824, and connect BUSS OUTs (GROUP OUTs) 1-4 to ANALOG INs 1-4 of the D824.

In this case, first record Tracks 1-4, then re-patch the cables to record Tracks 5-8.

It would be convenient to connect a patch bay between the D824’s ANALOG INs and the mixer’s BUSS OUTs (GROUP OUTs) so that you can make connections from the front.

D824

Patch bay

Analog mixer

<Hints>

By using the optional Model 5042 (8-8 I/O card for the D824) or Model 5043 (8-16 I/O card for the D1624), you can input and output analog audio signals via balanced connections.

For details about the optional accessories, consult the dealer you purchased the recorder from or our sales office.

13

Page 13
Image 13
Fostex D1624 manual Connecting a analog mixer, Connections when using the D824, Hints