Electrical connection
CAUTION!
Safety standards require the appliance to be earthed.
Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed.
The fuse rating is also to be found on the rating plate.
Always plug the mains plug into a correctly in- stalled shockproof socket.
This could constitute a fire hazard through over- heating.
If necessary, have the domestic wiring system socket replaced. In case that the electrical ca-
Levelling
ble has to be replaced, contact your local Serv- ice Force centre.
The plug must be accessible after the appliance has been installed.
Never unplug the appliance by pulling on the cable. Always pull the plug.
The manufacturer accepts no liability for failure to observe the above safety precautions.
Fitting under a counter
By removing the dishwasher’s worktop, you can install it under a close fitting sink unit or a pre- existing top.
Be sure that once the appliance has been in- stalled, it is easily accessible for the service engineer in the event that a repair is required.
Good levelling is essential for correct closure and
sealing of the door.
When the appliance is correctly levelled, the door will 
not catch on either side of the cabinet.
23
