Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570

-

 

600

820

 

600

 

IN05

 

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the consumer service department.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

20

Page 19 Page 21
Page 20
Image 20
Zanussi ZSF 6150 S manual Installation instructions, Fitting under a counter, Levelling, Water supply connections
Page 19 Page 21

ZSF 6150 S, ZSF 6150 specifications

The Zanussi ZSF 6150 and ZSF 6150 S are advanced dishwashers designed to deliver exceptional performance and convenience in the kitchen. With their sleek designs, these machines blend seamlessly into any home environment while providing impressive cleaning capabilities.

One of the standout features of the Zanussi ZSF 6150 and ZSF 6150 S is their energy efficiency. Both models are equipped with the latest technologies that ensure optimal water and electricity usage, significantly reducing the overall running costs. They are rated highly for energy efficiency, making them an environmentally friendly choice for homeowners looking to cut down on their carbon footprint.

The spacious interior of these dishwashers is another highlight, capable of accommodating up to 13 place settings. This makes them perfect for families and those who frequently host gatherings. The adjustable baskets provide flexibility in loading various types of dishes, from tall pots to delicate glassware. The models also include a half-load option, allowing for efficient washing even when the dishwasher is not full.

Innovative cleaning technologies elevate the ZSF 6150's performance. The integrated SensorControl system intelligently monitors the level of dirt and adjusts the wash cycle accordingly. This ensures that each wash is tailored to the load, delivering thorough cleaning without wasting resources. Additionally, the innovative AquaStop feature provides peace of mind by preventing leaks and water damage.

The user-friendly interface on both models makes operation straightforward. The electronic control panel offers different washing programs, including intensive, eco, and rapid cycles, catering to various cleaning needs and time constraints. The delayed start function is another convenient feature, allowing users to schedule washes at their convenience — especially handy for saving energy during off-peak hours.

Noise level is another critical aspect of the ZSF 6150 and ZSF 6150 S. With a low decibel rating, these dishwashers operate quietly, making them suitable for open-plan living spaces where noise can be an issue.

In conclusion, the Zanussi ZSF 6150 and ZSF 6150 S are designed with modern technology and user convenience in mind. Their energy efficiency, spacious interiors, advanced cleaning technologies, and quiet operation make them an excellent addition to any kitchen. For those seeking an effective and reliable dishwasher, these models stand out as compelling choices that balance performance with sustainability.
Top Page Image Contents