Water outlet hose connection, Electrical connection

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

13 A

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

ZSF 6150 S, ZSF 6150 specifications

The Zanussi ZSF 6150 and ZSF 6150 S are advanced dishwashers designed to deliver exceptional performance and convenience in the kitchen. With their sleek designs, these machines blend seamlessly into any home environment while providing impressive cleaning capabilities.

One of the standout features of the Zanussi ZSF 6150 and ZSF 6150 S is their energy efficiency. Both models are equipped with the latest technologies that ensure optimal water and electricity usage, significantly reducing the overall running costs. They are rated highly for energy efficiency, making them an environmentally friendly choice for homeowners looking to cut down on their carbon footprint.

The spacious interior of these dishwashers is another highlight, capable of accommodating up to 13 place settings. This makes them perfect for families and those who frequently host gatherings. The adjustable baskets provide flexibility in loading various types of dishes, from tall pots to delicate glassware. The models also include a half-load option, allowing for efficient washing even when the dishwasher is not full.

Innovative cleaning technologies elevate the ZSF 6150's performance. The integrated SensorControl system intelligently monitors the level of dirt and adjusts the wash cycle accordingly. This ensures that each wash is tailored to the load, delivering thorough cleaning without wasting resources. Additionally, the innovative AquaStop feature provides peace of mind by preventing leaks and water damage.

The user-friendly interface on both models makes operation straightforward. The electronic control panel offers different washing programs, including intensive, eco, and rapid cycles, catering to various cleaning needs and time constraints. The delayed start function is another convenient feature, allowing users to schedule washes at their convenience — especially handy for saving energy during off-peak hours.

Noise level is another critical aspect of the ZSF 6150 and ZSF 6150 S. With a low decibel rating, these dishwashers operate quietly, making them suitable for open-plan living spaces where noise can be an issue.

In conclusion, the Zanussi ZSF 6150 and ZSF 6150 S are designed with modern technology and user convenience in mind. Their energy efficiency, spacious interiors, advanced cleaning technologies, and quiet operation make them an excellent addition to any kitchen. For those seeking an effective and reliable dishwasher, these models stand out as compelling choices that balance performance with sustainability.

Zanussi ZSF 6150 S manual Water outlet hose connection, Electrical connection

Models: ZSF 6150 S ZSF 6150