6.If necessary, pads are supplied for the rear feet to make sliding the appliance in and out of the recess easier. To fit the pads, press them onto the rear feet.
If required, the dimensions of these pads can be reduced by breaking them where marked.
2 | 1 |
B
3
N.B. The joint cover (B) is to be assembled after hav- ing installed the appliance in the recess.
7.Screw appliance into place and retain the cabinet with screws through the securing brackets into the worktop or adjacent woodwork as necessary.
2/a |
115° |
4 |
5
20
