Installation and Operation
Before You Load You must remove the outside length of media Media in the (that is, one, full revolution of labels and any Printer liner). When you remove this part of the media, you remove the oils, dust, and adhesives that contaminate it. Tape or adhesive holds the loose end and the outside length of media becomes contaminated when handled or
stored.
Labels
Remove all labels that are held by adhesives or tape
MOVIE
Tag Stock
Detach both ends of the bottom tag
You must avoid dragging adhesive or dirty media between the print head and platen. Such an occurrence damages the print head and is not covered under your warranty. Using clean media prevents damage and reduces wear on the print head and platen.
7 |
