BATTERIES AND CHARGING
Removing and Replacing Batteries
Batteries are removed from the Encore 2 by the following procedure:
1.Face the front of the printer. Push the battery release button on the right side of the printer down as indicated by the arrow.
2.Firmly slide the battery pack out of the printer until it is clear while still pressing the battery release but- ton.
Batteries are replaced by the following procedure:
1.Align the battery pack to the printer so that the battery contacts (the metal plates on the top of the battery) are oriented towards the front of the printer.
2.Slide the pack into the printer until it latches with a distinct “click”.
Battery Release | Battery Charge |
Latch (push “down” | Jack |
to release) |
|
ENCORE 2 BATTERY INSTALLATION
Conditioning
IMPORTANT
Encore 2 batteries must be cycled a minimum of three times before maximum capacity is realized. A battery is cycled by fully charging, then fully discharging it through
normal use.