Chargers
Listed below are the specifications for the Encore 2 chargers:
(Part numbers will vary depending on specific country of use. Consult factory for complete part numbers.) This charger is designed to charge up to four batteries simultaneously. Battery packs may be charged separately or while plugged into the printer. Typical charge time is 90 minutes. Switch selectable 110/220 V.A.C. input voltage. Supplied with line cords compatible with most international standards.
Do not attempt to charge batteries while printing. Attempting to print while charging batteries with the
UCN72: (p/n series
(Part numbers will vary depending on specific country of use. Consult factory for complete part numbers.) UC72N is a wall mounted single charger with universal 110 to 230,
Do not attempt to charge batteries while printing. Attempting to print while charging batteries with the UC72N charger can result in unreliable charging.
Low Battery Shutdown
The Encore 2 monitors battery charge level in software and will cause the Power LED to flash as the batteries become depleted. The printer should be shut off and the battery pack recharged. The printer will automatically shut itself off if the batteries become severely discharged.
The optional real time clock will maintain its settings for approximately fifteen minutes while batteries are being replaced.