Zebra Technologies APL-I - page 103

103
Control Panel Options
Control Panel Options
11/24/09 APL-I Reference Guide 14177L-003
3333 3TAKE LABEL This is automatically set during calibration.
Password protected.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
3 3333MARK S. This is automatically set during calibration.
Password protected.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
33TRANS GAIN This is automatically set during calibration.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
33TRANS BASE This is automatically set during calibration.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
33TRANS BRIGHT This is automatically set during calibration.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
333
3MARK MED S. This is automatically set during calibration.
Password protected.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
333 3 MEDIA LED This is automatically set during calibration.
Password protected.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
Table 3 • Control Panel Differences on Supported Printers (Continued)
XiIIIPlus
Z4Mplus/Z6Mplus 105SL
ZM400/ZM600 PAX4 Xi4
Control Panel Option Details and Menu Choices