Zebra Technologies APL-I - page 104

Control Panel Options
Control Panel Options
104
14177L-003 APL-I Reference Guide 11/24/09
333333RIBBON GAIN/LED This is automatically set during calibration.
Password protected.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
3MARK GAIN This is automatically set during calibration.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
333MARK LED This is automatically set during calibration.
Password protected.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
333 3 LCD ADJUST This allows you to adjust the contrast of your
LCD.
3RTS TAKEUP ARM This is used as a diagnostic tool to monitor the
voltage supplied to the Ribbon Tensioning
System Takeup Dancer Arm (110PAX 4 only).
3RTS SUPPLY ARM This is used as a diagnostic to monitor the
voltage supplied to the Ribbon Tensioning
System Supply Dancer Arm (110PAX4 only).
33 333IDLE DISPLAY This allows you to select the LCD options for
the real-time clock.
33 333RTC DATE This shows the current date.
Password Protected.
33 333RTC TIME This allows you to set the time following the
convention selected in IDLE.
Password protected.
333 33WIRED PS CHECK? This tells if the printer sear ches for a wired
print server at bootup.
33
PRIMARY NETWORK This allows you to see if the printer is using a IP
setting from the wireless or a wired print server
at bootup.
Table 3 • Control Panel Differences on Supported Printers (Continued)
XiIIIPlus
Z4Mplus/Z6Mplus 105SL
ZM400/ZM600 PAX4 Xi4
Control Panel Option Details and Menu Choices