•Network printers: refer to the RF LAN Information section of the Self Test printout to verify the printer’s SSID and IP addresses are correct, and that the printer is “associated” with the wireless LAN.
•Invalid label format or command structure — use Hex Dump Mode for troubleshooting. Refer to the Programming Manual for more information.
Reduced battery charge life:
•Recondition (cycle) battery.
•Damaged
•Check battery date code: if one to two years old, short charge life may be due to normal aging.
Status light flashing and beeper chimes:
• No application: reload program.
Status light flashing
•If using SRRF communications: normal indication while data is being received.
Status light always on:
•Check media is loaded and media compartment cover is closed and latched
Communication Error:
•Check media is loaded, media compartment cover is closed and latched, and error light is off.
•Check baud rate.
•Replace cable to terminal.
Never use any sharp objects on the printer mechanism as it could damage the print head. Use only isopropyl alcohol, the supplied cleaning pen and /or a cotton swab for
cleaning the printer.