Troubleshooting

Check the following troubleshooting chart for the possible cause of a problem before contacting service.

Problem

Possible Cause

Solution

 

 

 

No power.

The power cord is disconnected.

Plug the power cord into the wall power

 

 

outlet securely.

 

 

 

The power is on, but

No disc is inserted.

Insert a disc. (Check that the DVD or,

the DVD player does

 

audio CD indicator in the display

not work.

 

window lights.)

 

 

 

No picture.

The TV is not set to receive DVD signal

Select the appropriate video input

 

output.

source on the TV so the picture from the

 

 

DVD player appears on the TV screen.

 

 

 

 

The video cable is not connected

Connect the video cable securely.

 

securely.

 

 

 

 

 

The connected TV power is turned off.

Turn on the TV.

 

 

 

No sound.

The equipment connected with the

Select the correct input source on the

 

audio cable is not set to receive DVD

audio receiver so you can listen to the

 

signal output.

sound from the DVD player.

 

 

 

 

The audio cable is not connected

Connect the audio cable securely.

 

securely.

 

 

 

 

 

The power of the equipment connected

Turn on the equipment connected with

 

with the audio cable is turned off.

the audio cable.

 

 

 

 

The Digital Audio Output is set to the

Set the Digital Audio Output to the

 

wrong position.

correct position, then turn on the DVD

 

 

player again by pressing POWER.

 

 

 

The playback picture is

The disc is dirty.

Clean the disc.

poor.

 

 

 

 

 

The DVD player does

No disc is inserted.

Insert a disc. (Check that the DVD, or

not start playback.

 

audio CD indicator in the DVD display

 

 

lights.)

 

An unplayable disc is inserted.

Insert a playable disc. (Check the disc

 

 

type, color system, and Regional Code.)

 

 

 

 

The disc is placed upside down.

Place the disc with the playback side

 

 

down.

 

 

 

 

The disc is not placed within the guide.

Place the disc on the disc tray correctly

 

 

inside the guide.

 

 

 

 

The disc is dirty.

Clean the disc.

 

 

 

 

A Lock level is set.

Cancel the Rating function or change

 

 

the rating level.

 

 

 

The remote control

The remote control is not pointed at the

Point the remote control at the remote

does not work properly.

remote sensor on the DVD player.

sensor on the DVD player.

 

The remote control is too far from the

Operate the remote control within 23 ft

 

DVD player.

(7 m).

 

There is an obstacle between the remote

Remove the obstacle.

 

control and the DVD player.

 

 

The batteries in the remote control are

Replace the batteries with new ones.

 

exhausted.

 

 

 

 

24

Page 24
Image 24
Zenith DVB352 warranty Troubleshooting, Problem Possible Cause Solution, Remove the obstacle