Zenith XBS341 warranty VCR Operation Tape Counter Memory Feature, Additional Information

VCR Operation (Continued)

Tape Counter Memory Feature

Real-Time Counter

Shows length of tape run in hours, minutes, and seconds. Press CLK/CNT to select the real-time counter display.

Every press of CLK/CNT changes the TV screen dis- play as illustrated below.

2:15 AM	0:05:25	REM 1:07
CLOCK	COUNTER	REMAINING TIME

Counter changes to “0:00:00” when the cassette is ejected.

The real-time counter does not operate if nothing is recorded on the tape.

The real-time counter will not work unless a tape is inserted.

Additional Information

In manual recording, Timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD+Hi-Fi VCR automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the DVD+Hi-Fi VCR will turn itself off.

After you have finished using the DVD+Hi-Fi VCR, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it.

Be sure the DVD+Hi-Fi VCR Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by tuning the televi- sion to the DVD+Hi-Fi VCR channel (3 or 4) and using the TV/VCR selector to turn the DVD+Hi-Fi VCR’s TV indicator off.

Do not attempt to hook up more than one television set to the DVD+Hi-Fi VCR for either recording or playback.

Counter Memory Feature

This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.

1Begin recording or playing a tape.

Press CLK/CNT repeatedly to display the

2 real-time counter on the TV screen.

3the real-time counter to “0:00:00” by pressing CLEAR.At the point that you want to locate later, reset

4Continue to play or record.

5 Press STOP (x) once or twice when recording or playback finishes.

6The tape automatically stops when the tape counter returns to about “0:00:00”.Press BACKWARD (.).

Tape Remaining

This function shows the remaining time on the tape during recording or playback.

Press CLK/CNT repeatedly until the REM indicator appears on the TV screen during recording or playback.

ote

The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc.)

Auto Play System

This DVD+Hi-Fi VCR features automatic playback. Load a cassette (with the safety tab removed).

The Output Source is changed to VCR mode automatically.

The power turns on automatically and playback begins.

At the end of the tape, the DVD+Hi-Fi VCR stops and rewinds the tape.

The cassette is ejected after rewinding and the VCR turns itself off automatically.

LOAD		AUTO
AUTO	AUTO	AUTO
		POWER
PLAY	REWIND
		OFF
TAPE
		EJECT

ote

Auto power off does not function during regular DVD play mode. (DVD+Hi-Fi VCR power stays on.)

28