Zenoah OPT3 BCZ2600S BCZ2600SU OPT4 BCZ2600S BCZ2600SU, OPT5 OPT6, 26 , BCZ2600S, BCZ2600SU

11. Optional blade usage

OPT3

BCZ2600S

BCZ2600SU

OPT4

BCZ2600S

BCZ2600SU

OPT5

OPT6

26 

IMPORTANT

[ BCZ2600S, BCZ2600SU ]

Change to the debris guard which is suitable for the metal blade. (OPT3)

TIGHTENING TORQUE: 130~174 in-lbs(14.7~19.6 N.m.)

(1)Guard Ass’y:	6489-24000	(6)Screw:	0277-10412
(2)Guard:	6489-24110	(7)Plate:	6489-24120
(3)Plate Comp.:	6489-24200	(8)Washer:	01601-20513
(4)Plate:	6489-24210	(9)Bolt:	01252-30516
(5)Blade:	6489-24220

IMPORTANT

[ BCZ2600S, BCZ2600SU ]

Change the loop handle to the J-handle for safe operation. (OPT4)

(1)Bracket: 3583-14101

(2)J-handle: 6367-14200

■STARTING THE ENGINE

Please refer 5.For safe operation (P.8~9), 8.Operation (P.17).

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OPT5)

■CUTTING METHOD

a)Use the front left side cutting.

b)Guide the blade from your right to left with it tilted slightly to your left. (OPT6)

c)When mowing a wide area, start working from your left end to avoid interference of cut grass.

d)The blade may be seized by weeds if the engine