Safety Precautions

WARNING

To reduce the risk of injury associated with contacting rotating parts, stop the engine before installing or removing attachments. Do not operate without net in place. Always disconnect the spark plug before performing maintenance or accessing movable parts.

Do not allow children to use blower. Make sure that each person you authorize to operate the blower understands all of the safety rules in this manual.

Avoid using any accessory or attachment other than those bearing the RedMax mark for use with the blower.

Drain the fuel from the fuel tank before transporting or storing the blower.

When storing the blower, choose a space indoors free from moisture and out of the reach of children.

Examine the blower at intervals for loose fasteners and rusted or damaged parts. Use special care around the fuel line, the muffler, and the ignition wiring.

All engine service except for those described in this manual should be performed by competent service personnel. Improper service to the blower fan and muffler could cause a hazardous failure.

FUEL

WARNING

To reduce the risk of fire and burn injury:

Handle fuel with care. It is highly flammable.

Do not smoke while handing fuel.

Do not refuel a hot engine.

Do not refuel a running engine.

Avoid spilling fuel or oil. Always wipe unit dry before using.

Move at least 10 ft. (3 meters) away from the fueling point before starting engine.

Always store gasoline in a container approved for flammable liquids.

Make sure the unit is properly assembled and in good operating condition.

WORKING CONDITION

Check the work area that the blower will be used in and remove or cover all valuables that may be damaged by the air blast or thrown debris.

To reduce the risk of injury associated with exhaust fume inhalation, do not operate in unventilated area. The exhaust gases contain harmful carbon monoxide.

Do not allow bystanders in work area.

Do not point the blower nozzle in the direction of people or pets.

5

Page 5
Image 5
Zenoah EB4401 manual Fuel, Working Condition