Zenoah EHT601D F19 F20, MUFFLER AFTER 100 HOURS OF USE, screw driver 2 muffler, Before, Storage

F19

F20

English

6. MAINTENANCE

■MUFFLER

AFTER 100 HOURS OF USE

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent at the same time. (F19)

(1)screw driver

(2)muffler

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has wipe it away using oil-free, lead-free gasoline.

■ MAINTENANCE		BEFORE
	STORAGE
	IMPORTANT

Use a dry rag to wipe any fuel which has been spilled onto the unit.

(F20)

1.Extract fuel from the tank and run the engine until it stops naturally.

2.Remove the spark plug and put in 1~2 cc of 2-cycle oil in the engine. Pull the starter rope 2~3 times, set the plug back, and stop it at the contraction position.

3.Apply anti-rust oil to the metal parts such as the throttle wire etc., put the cover on the blade, and keep it indoor avoiding dampness.

36