B. Guide Bar
•Reverse the bar occasionally to prevent partial wear.
•The bar rail should always be a square. Check for wear of the bar rail. Apply a ruler to the bar and the outside of a cutter. If a gap is observed between them, the rail is normal. Otherwise, the bar rail is worn. Such a bar needs to be corrected or replaced.
WARNING:
This saw is equipped with the following low kickback bar/chain combination:
|
| RedMax® Part Number | |
Saw Model | Bar Size | Guide Bar | Saw Chain |
G455AVS | 16” | G0021 | |
For replacement use only above bars and chains or the following:
OREGON BAR
16 inch DOUBLE GUARD™ Pro bar, Mount code #A195.
OREGON CHAIN
G455AVS
33SL
16
