GENERAL SAFETY PRECAUTIONS

Lubricating cutting equipment

WARNING! Poor lubrication of cutting ! equipment may cause the chain to snap,

which could lead to serious, even fatal injuries.

Chain oil

Chain oil must demonstrate good adhesion to the chain and also maintain its flow characteristics regardless of whether it is warm summer or cold winter weather.

We recommend the use of our own oil for both maximum chain life and to minimise environmental damage. If our own chain oil is not available, standard chain oil is recommended.

Never use waste oil! Using waste oil can be dangerous to you and damage the machine and environment.

IMPORTANT! When using vegetable based saw chain oil, dismantle and clean the groove in the bar and saw chain before long-term storage. Otherwise there is a risk of the saw chain oil oxidizing, which will result in the saw chain becoming stiff and the bar tip sprocket jamming.

Filling with chain oil

All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

The saw chain oil tank and the fuel tank are designed so that the fuel runs out before the saw chain oil.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a lean mixture may mean that the fuel lasts longer than the oil) and that you also use the recommended cutting equipment (a bar that is too long will use more chain oil).

Checking chain lubrication

Check the chain lubrication each time you refuel. See instructions under the heading Lubricating the bar tip sprocket.

Aim the tip of the bar at a light coloured surface about 20 cm (8 inches) away. After 1 minute running at 3/4 throttle you should see a distinct line of oil on the light surface.

If the chain lubrication is not working:

Check that the oil channel in the bar is not obstructed. Clean if necessary.

Check that the groove in the edge of the bar is clean. Clean if necessary.

Check that the bar tip sprocket turns freely and that the lubricating hole in the tip sprocket is not blocked. Clean and lubricate if necessary.

If the chain lubrication system is still not working after carrying out the above checks and associated measures you should contact your service agent.

English 13

Page 13
Image 13
Zenoah G5300 manual Lubricating cutting equipment, Which could lead to serious, even fatal injuries Chain oil

G5300 specifications

The Zenoah G5300 is a highly regarded two-stroke gasoline engine, well-known for its robust performance and reliability within the realm of outdoor power equipment. Its engineering reflects a commitment to innovation and efficiency, making it ideal for various applications such as brush cutters, chainsaws, and other handheld equipment.

One of the key features of the G5300 is its displacement, which typically measures around 53cc. This size strikes an excellent balance between power output and weight, enabling users to tackle demanding tasks without the burden of a heavy machine. The engine's design leverages a high power-to-weight ratio, resulting in enhanced maneuverability and ease of use, particularly in tight spaces.

The G5300 utilizes a sophisticated electronic ignition system. This technology ensures reliable starting, consistent performance, and reduced emissions. The engine also features a dual-ring piston, which improves compression efficiency and enhances overall power delivery. This design contributes to a smoother operation and helps extend the life of the engine.

Another notable characteristic of the Zenoah G5300 is its fuel efficiency. With advancements in combustion technology, the engine is designed to reduce fuel consumption while still providing ample power. This not only lowers operational costs for the user but also minimizes environmental impact, aligning with contemporary preferences for sustainable practices in outdoor equipment.

Durability is another hallmark of the G5300. Built with high-quality materials, the engine is designed to withstand the rigors of outdoor use. The components are rigorously tested to ensure they can handle extreme conditions, whether it's scorching heat or chilly weather. The engine's construction also includes vibration dampening features, enhancing user comfort during extended operations.

Serviceability is a consideration in the design of the G5300, with easily accessible components promoting straightforward maintenance. Users can quickly perform routine checks, tune-ups, and repairs, minimizing downtime and extending the lifespan of the equipment.

In summary, the Zenoah G5300 stands out in the outdoor power equipment market due to its powerful and efficient design. With a focus on durability, serviceability, and fuel efficiency, it meets the demands of both professional landscapers and hobbyist gardeners alike. Its blend of advanced technology and practical features makes it a reliable choice for anyone seeking a high-performance engine for their outdoor tasks.