MAINTENANCE

Adjustment of the oil pump

The oil pump is adjustable. Adjustments are made by turning the screw using a screwdriver or combination spanner. The machine is supplied from the factory with the screw set to position 2. Turning the screw clockwise will reduce the oil flow and turning the screw anti- clockwise will increase the oil flow.

 

+

2

1

 

3

 

 

Recommended settings:

 

Bar 18":

Position 2

Bar 20":

Position 3

!

WARNING! The engine must not be

running when making adjustments.

Cooling system

To keep the working temperature as low as possible the machine is equipped with a cooling system.

The cooling system consists of:

1Air intake on the starter.

2 Air guide plate.

3 Fins on the flywheel.

4 Cooling fins on the cylinder.

5 Cylinder cover (directs cold air over the cylinder).

5

4

3

2

1

Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling

system results in the machine overheating which causes damage to the piston and cylinder.

Note! The cooling system on a chain saw with catalytic converter must be cleaned daily. This is particularly important on chain saws with catalytic converters, because the higher exhaust temperature requires efficient cooling of the engine and the catalytic converter unit.

”Dust Free” centrifugal cleaning

Centrifugal cleaning means the following: All air to the carburettor passes through the starter. Dirt and dust is centrifuged out by the cooling fan.

IMPORTANT! In order to maintain operation of the centrifugal cleaning system it must be regularly maintained. Clean the air intake to the starter, the fins on the flywheel, the space around the flywheel, inlet pipe and carburettor compartment.

Winter use

Running problems can occur when using the machine in the cold and snowy conditions caused by:

Too low engine temperature.

Icing of the air filter and carburettor.

Special measures are therefore often required:

Preheat the intake air to the carburettor by using the heat from the cylinder.

Partly mask the air inlet on the starter to increase the working temperature of the engine.

Temperature 0°C or colder:

The cylinder cover is designed so it can be adjusted for running in cold weather. Twist the winter flap so that preheated air from the cylinder can pass into the carburettor space preventing icing of the air filter, etc.

IMPORTANT! Any maintenance other than that described in this manual must be carried out by your servicing dealer (retailer).

English 35

Page 35
Image 35
Zenoah G5300 manual Adjustment of the oil pump, Cooling system, Dust Free centrifugal cleaning, Winter use

G5300 specifications

The Zenoah G5300 is a highly regarded two-stroke gasoline engine, well-known for its robust performance and reliability within the realm of outdoor power equipment. Its engineering reflects a commitment to innovation and efficiency, making it ideal for various applications such as brush cutters, chainsaws, and other handheld equipment.

One of the key features of the G5300 is its displacement, which typically measures around 53cc. This size strikes an excellent balance between power output and weight, enabling users to tackle demanding tasks without the burden of a heavy machine. The engine's design leverages a high power-to-weight ratio, resulting in enhanced maneuverability and ease of use, particularly in tight spaces.

The G5300 utilizes a sophisticated electronic ignition system. This technology ensures reliable starting, consistent performance, and reduced emissions. The engine also features a dual-ring piston, which improves compression efficiency and enhances overall power delivery. This design contributes to a smoother operation and helps extend the life of the engine.

Another notable characteristic of the Zenoah G5300 is its fuel efficiency. With advancements in combustion technology, the engine is designed to reduce fuel consumption while still providing ample power. This not only lowers operational costs for the user but also minimizes environmental impact, aligning with contemporary preferences for sustainable practices in outdoor equipment.

Durability is another hallmark of the G5300. Built with high-quality materials, the engine is designed to withstand the rigors of outdoor use. The components are rigorously tested to ensure they can handle extreme conditions, whether it's scorching heat or chilly weather. The engine's construction also includes vibration dampening features, enhancing user comfort during extended operations.

Serviceability is a consideration in the design of the G5300, with easily accessible components promoting straightforward maintenance. Users can quickly perform routine checks, tune-ups, and repairs, minimizing downtime and extending the lifespan of the equipment.

In summary, the Zenoah G5300 stands out in the outdoor power equipment market due to its powerful and efficient design. With a focus on durability, serviceability, and fuel efficiency, it meets the demands of both professional landscapers and hobbyist gardeners alike. Its blend of advanced technology and practical features makes it a reliable choice for anyone seeking a high-performance engine for their outdoor tasks.