HB2302 / HBZ2601
11. Optional vacuum kit usage
Attach the adequate accessories, respectively for blower operation and
NOTE
•Use the gloves during operation.
•In adjustment of the blower/dust collector or in other types of operation, be sure to stop the engine and detach the spark plug cap.
•Never start operation unless this machine is com- pletely assembled.
MOUNTING THE
•This handle is supplied with the blower.
•Fit the holes of volute and handle, tighten the screws.
•Be sure to tighten the screws straightly.
(1)Support Handle
(2)Holes
(3)Screws
2.Align the 
(5) indicated on the vacuum pipe (4)
with the 
indicated on the blower. Then insert the vacuum pipe (4) into the blower.
3.Turn the vacuum pipe (4) until the 
(5) is aligned with the 
indicated on the blower to lock the vacuum pipe.
WARNING
•Hold the bottom of the vacuum pipe when turning the vacuum pipe to install or remove it.
2)
1.Fit the extension pipe (1) groove with main unit port projection, turn to mount the pipe to the main unit.
2.Tighten the clamp screw (2) securely.
3) Installing Vacuum Pipe (nozzle)
1. Loosen the screw (3), and open the suction port cover.
4)Installing Elbow and Dust Bag
1. Open the fastener of the dust bag.
(6)Convex Groove
(7)Convex End
2.Insert the elbow convex groove into the dust bag el- bow opening.
Continue to push the elbow convex groove until the convex hits against the dust bag opening.
Close the dust bag fastener.
(8)Groove
