INFORMATION
This machine is equipped with an Overload Cancellation Mechanism.
When the cutting blades have got into metal wires or those twigs difficult to cut, the mechanism acts as a shock absorber, and protects the drive gears and the blades from severe reaction which could give damage to those parts.
When the blades are frequently caught by twigs, please check the following points:
1.Size of the twigs. NEVER TRY TO CUT TWIGS THICKER THAN 3/16”.
2.Condition of the blade edges. REPLACE THE WORN OUT BLADES.
For the detail of the mechanism, please see below. Thank you for choosing our product.
