Manuals / Zenoah / Power Tools / Cordless Saw

Zenoah SGCZ2600DL Operation, Starting Engine, Stopping Engine, Adjusting Throttle Cable

Models: SGCZ2600DW SGCZ2600DL

1 16
Download 16 pages 42.01 Kb
Page 10
Image 10

SGCZ2600DL/SGCZ2600DW

8. Operation

STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine.

2.Push the primer pump several times until overflown fuel flows out in the clear tube.

3.Move the choke lever to the closed position. choke lever

close

open

[SGCZ2600DL][SGCZ2600DW]

IMPORTANT

Avoid pulling the rope to its end or returning it by releas- ing the knob. Such actions can cause starter failures.

7.Move the choke lever downward to open the choke. And restart the engine.

8.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE

1.Release the throttle trigger and run the engine for a half minute.

2.Shift the stop switch to the “Stop” position.

IMPORTANT

Except for an emergency, avoid stopping the engine while pulling the throttle trigger.

ADJUSTING THROTTLE CABLE

The normal play is 1 or 2mm when measured at the car- buretor side end. Readjust with the cable adjuster as required.

(1)

(1)

 

 

1

1 to 2mm ( 04in )

Cable adjuster

2

3

(1)Stop switch

4.[SGCZ2600DL] Set the stop switch to the “-” posi- tion. Set the throttle trigger to the start position (1 → 2

→3).

Place the unit on a flat, firm place.

Keep the cutting head clear of everything around it. [SGCZ2600DW] Set the stop switch to the “RUN” position. Place the unit on a flat, firm place. Keep the cutting head clear of everything around it.

5.Place the unit on a flat, firm place. Keep the cutting head clear of everything around it.

6.While holding the unit firmly, pull out the starter rope quickly.

ADJUSTING IDLING SPEED

1.When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

Idle adjusting screw

NOTE

Warm up the engine before adjusting the idling speed.

GB-10

Page 9 Page 11
Page 10
Image 10
Zenoah SGCZ2600DL Operation, Starting Engine, Stopping Engine, Adjusting Throttle Cable, Adjusting Idling Speed
Page 9 Page 11

SGCZ2600DW, SGCZ2600DL specifications

The Zenoah SGCZ2600DL and SGCZ2600DW are commercial-grade grass trimmers that have made a significant impact in the landscaping industry due to their reliability, performance, and advanced technology. These models are engineered to deliver exceptional cutting power and efficiency, making them ideal for both professional landscapers and garden enthusiasts.

One of the standout features of the SGCZ2600DL and SGCZ2600DW is their powerful 26cc two-stroke engine, which provides a robust performance without compromising on weight. The engine is designed to deliver high torque along with a consistent power output, allowing users to tackle tough jobs with ease. Additionally, both models are equipped with a reliable ignition system that ensures easy starting and minimal maintenance.

The ergonomic design of these trimmers enhances user comfort during prolonged usage. With a lightweight frame and well-balanced construction, users can maneuver the tool effortlessly, reducing fatigue during extended trimming sessions. The adjustable handles further enhance user control, allowing for precise cutting at various angles.

In terms of cutting technology, the SGCZ2600DL and SGCZ2600DW feature a dual-line bump feed head. This system allows for quick and efficient line advancement, enabling users to reload the trimmer line with minimal downtime. The dual-line configuration also provides a wider cutting path, thus increasing productivity and reducing the time needed for clearing larger areas of grass and weeds.

Both models are designed for durability, featuring high-quality materials that can withstand challenging working conditions. The reinforced housing and components ensure that the trimmers remain operational even in demanding environments. Furthermore, the SGCZ2600DL and SGCZ2600DW utilize advanced anti-vibration technology, which reduces the amount of vibration transferred to the user's hands, further improving comfort and usability.

Another noteworthy aspect is the fuel efficiency of these machines. They are crafted to optimize fuel consumption while minimizing emissions, which aligns with modern environmental standards. This not only benefits the user financially but also contributes to a greener planet.

Overall, the Zenoah SGCZ2600DL and SGCZ2600DW trimmers stand out in the market for their combination of power, efficiency, and user-friendly design. Suitable for various landscaping tasks, these tools exemplify the quality and innovation that Zenoah is known for, making them a valuable addition to any gardening toolkit.