SRTZ2610/SRTZ2610F/LRTZ2610

6. Set up

MOUNTING ENGINE

1.Push the shaft tube toward the clutch housing and move it by hand to check that the drive shaft is engaged with the gears.

2.Insert the shaft tube into the clutch housing until it bot- toms, and align the positioning holes on the clutch hous- ing and the shaft tube and install the screw. When diffi- cult to engage, twist the engine slightly.

3.Fasten the clamp securely with two screws.

Bolt

WARNING

Never use any screws other than those specified by the manufacturer, or the engine can get loose, resulting in a hazardous event.

IMPORTANT

Tighten the screws gradually by turns.

CONNECTING THROTTLE WIRE

1.Remove the air cleaner cover.

2.Connect the end of the throttle wire to the joint on the top of the carburetor.

M3 screw

Adjuster

Insert the cable to the end of

adjuster

Full on stopper

Idling adjust screw

1.Connect throttle wire with carburetor. Insert the cable to the end of adjuster fix the throttle cable by tightening M3 screw. (Tightening torque: 0.4 ~ 0.8 N.m.)

2.Make sure the ‘STOPPER-PLATE’ of carburetor moves to contact with ‘IDLING ADJUST SCREW’ and the ‘SWING- ARM’ of carburetor moves to contact with ‘FULL ON STOPPER’ by gripping throttle lever.

CONNECTING SWITCH WIRES

Connect the switch wires between the engine and the main unit. Pair the wires of the same color.

CLAMP

NOTE

clamp

 

Be the clamp in the location of the arrow mark.

arrow mark

INSTALLING HANDLE

NOTE

The handle is put during the arrow mark.

• Mount the handle to

SPACING

the shaft tube and

MIN

clamp it at a location

 

that is comfortable

 

to you.

 

About 19 inches (48 cm)

GB-8

ATTACHING THE TRIMMING MECHANISM

1.Remove the cap on the end of the main pipe.

2.Remove the screw screwed into the end of the trim- ming mechanism.

3.Insert the end of the trimming mechanism into the main pipe.

4.Line up the hole on the end of the trimming mecha- nism into which the screw is to be inserted with the hole on the main pipe, and screw the screw firmly in.

5.Using a 10-mm wrench, screw in the hexagonal bolt provided to fix the trimming mechanism into place.

(1)Main pipe

(2)Trimming mechanism

(3)Screw hole

(4)Screw

(5)Fastening bolt

WARNING

ALWAYS WEAR THE PROVIDED HARNESS WHEN USING THE MACHINE!

Always make sure the machine is hooked securely to the harness.

If you don't, you will be unable to control the machine safely. This can result in injury to yourself or others. Never use a harness with a defective quick release or any other damage.

HOW TO WEAR

1.Wear the provided harness without twisted bands, with the hanger on your right side.

(1) Hanger

(1)

QUICK RELEASE

The harness is equipped with a “QUICK RELEASE”devise. To release the machine from the harness in emergency situations, please follow the procedure as explained below.

WARNING

Make sure to check proper working of the QUICK RE- LEASE device BEFORE operating the machine. Make sure to hold the unit securely when using the

QUICK RELEASE.

While holding the unit by your right hand securely, press both sides of the buckle. sides of the buckle.

(1) Buckle

(1)

 

BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Depending on the working posture, slide clamp up or down until unit balances and the strap fits your body.

Page 8
Image 8
Zenoah LRTZ2610, SRTZ2610F owner manual Set up, Attaching the Trimming Mechanism, HOW to Wear, Quick Release, Balance Unit

LRTZ2610, SRTZ2610, SRTZ2610F specifications

Zenoah, a renowned name in the outdoor power equipment industry, has made significant strides with its line of professional-grade trimmers, particularly the SRTZ2610, LRTZ2610, and SRTZ2610F models. These devices are engineered for efficiency, power, and user comfort, making them ideal for both commercial and residential landscaping tasks.

The SRTZ2610 series features a robust 25.4cc, air-cooled, two-stroke engine, which delivers impressive torque and power for cutting through dense vegetation. Users appreciate the lightweight design, which minimizes fatigue during prolonged use. The SRTZ2610F model stands out due to its unique fuel-efficient technology combined with a high-performance engine, contributing to longer run times and reduced emissions. This makes it not only effective but also environmentally friendly.

One of the key innovations across these models is the Advanced Ignition System, which ensures reliable starting and smooth operation. This feature is vital for professional landscapers who require tools that can perform at a moment's notice. Additionally, these trimmers come equipped with an ergonomic handle and a cushioned grip that provides excellent control and comfort, reducing vibrations during operation.

The LRTZ2610 model is specifically designed for versatility, boasting a detachable shaft that allows users to customize their equipment with various attachment options. This feature expands its functionality, enabling users to switch from trimming to edging or even powering pruning saws without the need for multiple devices.

Another notable characteristic is the Easy-Load trimmer head system, designed for hassle-free line replacement. This system aids in saving time and maintaining productivity, two critical factors in professional landscaping.

Moreover, Zenoah trimmers prioritize durability. Each model is constructed with high-grade materials that withstand the rigors of frequent use. The ignition coil and fuel system have been designed to require minimal maintenance, leaving users with more time to focus on their projects.

Overall, the Zenoah SRTZ2610, LRTZ2610, and SRTZ2610F models combine advanced engineering with practicality. Whether for residential gardens or commercial landscapes, these trimmers represent a reliable choice for anyone seeking quality and performance in outdoor power equipment. With their powerful engines, ergonomic design, and innovative features, Zenoah trimmers are an excellent investment for both professional landscapers and homeowners alike.