8. Operation

STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Feed fuel into the fuel tank and tighten the cap se- curely.

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects, as it will start rotating upon starting of the engine.

3.Push the primer pump several times until overflown fuel flows out in the clear tube.

(1)Choke lever (2) Close (3) Open

(4)Purimer pump

4.Move the choke lever to the closed position.

5.Set the ignition switch to the “I” position. Set the throttle lever to the start position (1 → 2 → 3).

Place the unit on a flat, firm place.

Keep the cutting head clear of everything around it.

Stop Start

3. Ignition switch

1

 

START

2

6. While holding the unit firmly, pull out the starter rope quickly until engine fires.

WARNING

 

The product is equipped with a centrifugal clutch

 

mechanism, so the cutting attachment begins to ro-

 

tate as soon as the engine is started by putting the

G

throttle into the start position. When starting the en-

B

gine, place the product onto the ground in a flat clear

 

area and hold it firmly in place so as to ensure that

 

neither the cutting part nor the throttle come into con-

 

tact with any obstacle when the engine starts.

 

IMPORTANT

•Avoid pulling the rope to its end or returning it by re- leasing the knob. Such actions can cause starter fail- ures.

7.Move the choke lever downward to open the choke. And restart engine.

8.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE

Stop Start

Ignition switch

START

1.Release the throttle lever and run the engine for half a minute.

2.Shift the ignition switch to the STOP position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

GB-11

Page 10 Page 12
Page 11
Image 11
Zenoah BC2002, TR2001 owner manual Operation, Starting Engine, Stopping Engine
Page 10 Page 12

BC2002, TR2001 specifications

The Zenoah TR2001 and BC2002 are reputable models in the line of high-performance outdoor power equipment produced by Zenoah, a company known for its commitment to innovation and efficiency in engine design. These models highlight advanced technology and user-centric features, making them popular choices among landscaping professionals and enthusiasts alike.

The Zenoah TR2001 is a robust trimmer designed to deliver exceptional cutting performance and reliability. It utilizes a powerful 21.2 cc two-stroke engine that provides a balance of high power output and low weight. The engine’s design incorporates a unique ignition system that ensures quick starts and smooth acceleration, reducing operator fatigue during extended use. This model is also equipped with anti-vibration technology, which minimizes hand discomfort, allowing users to work longer without strain.

On the other hand, the Zenoah BC2002 is a versatile brush cutter that showcases similar engineering excellence. It also features a strong 21.2 cc engine and is tailored for cutting through thick vegetation with ease. One of the standout characteristics of the BC2002 is its adjustable handle system, which can be modified to different positions to enhance ergonomics and comfort. This feature significantly aids in maneuverability, especially when tackling challenging terrains.

Both models boast a lightweight design, with engineered materials that ensure durability without compromising portability. The fuel-efficient engine design allows for longer operational periods between refueling, which is crucial for professionals who depend on extended performance hours. Additionally, both the TR2001 and BC2002 come equipped with easy-to-use controls, making them accessible for users of all skill levels.

In terms of maintenance, Zenoah has kept these models simple. The air filtration system is designed for easy access, making routine checks and replacements hassle-free. This attention to maintenance ensures that users can keep their equipment in top condition with minimal downtime.

Overall, the Zenoah TR2001 and BC2002 stand out in the market for their powerful engines, user-friendly design, and advanced technologies that cater to both professional and casual users. With their impressive features, these models exemplify Zenoah's dedication to quality and performance in outdoor power tools. Whether tackling tough brush or maintaining a beautifully landscaped property, these machines deliver reliability and efficiency on every job.
Top Page Image Contents