Sirius Satellite Radio 10 manual Troubleshooting, Specifications

Troubleshooting

	FAULT	PROBABLE CAUSE	REMEDY
CRSR-10 does not turn on		Blown Fuse, power cable not properly	Check fuse, check power cable
		connected
	“Antenna	Satellite antenna not connected	Check satellite connection to CRSR-10
	Not Detected”
		Antenna or cable is faulty	Contact system installer or vendor
	message
			1. Switch to another FM frequency
		FM modulator frequency contains static	2. Move CRSR-10 closer to car FM
			antenna
	Audio static or loss of		3. Use FM switching box
	clarity	Vehicle antenna not connected to radio	Check vehicle antenna cable
No signal on CRSR-10		Check for obstacles over or around	Change location to eliminate nearby
	display	antenna or move antenna placement	obstacles (bridge, trees, etc.)
		1. Audio Cables not connected	1. Check cables at CRSR-10 and radio
	No Sound	2. Incorrect FM modulator frequency	2. Select another FM frequency
			3. Turn on FM transmitter in CRSR-10
		3. FM transmitter option not turned on
			menu
34
			Sanyo CRSR-10 User Guide

Specifications

Audio Output	776 mV RMS or 1 v peak to peak)
Total Harmonic Distortion (THD)	<0.5%
Signal-to-noise (S/N)	Greater than 83dB
Fuse Requirement	3A Slow Blow
Power Supply	7.6V-24V, Negative Ground, DC
Current Requirement	1A
Operating Temperature	-20 - +70C
CRSR-10 Dimensions	101mm(W) x 101mm(H) x 32mm(D)
...........................................................................................................................	(3.97” W x 3.97” H x 1.26” D)
CRSR-10 Weight	240g

	Note: Features and Specifications subject to change without notice.
		35
Sanyo CRSR-10 User Guide