Setting Channel Presets
You can store up to 20 of your favorite channels as presets, for quick access. Presets are stored in 2 banks, A and B, each containing 10 channel presets.
1.Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner of the Default Screen.
2.Select the channel you want to preset (see Basic Operation and Changing Channels on page 12).
3.Hold the numbered preset button you want to store the channel in for at least 2 seconds.
•The selected preset number will flash and then remain lit on the display to show that it has been memorized.
•If the preset button already has a channel stored in it, it will be replaced with the new channel.
Recalling Channel Presets
The 10 presets in the active bank (A or B) can be selected by pressing the “0” – “9” buttons.
1.Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner of the Default Screen.
2.Press the desired preset button “0” – “9” to recall the preset. The channel will change and the display will revert to the Default Screen for the new channel.
16 
Searching for a Channel Preset (P.TUNE Mode)
It is possible to quickly search through all of your presets using the CHANNEL Button.
1.Press and hold the BAND button to enter the Preset Tuning Mode (P.TUNE).
2.The bottom right portion of the display will change to highlight the current preset (bottom right).
3.Press the CHANNEL Button in either direction to move up or down through your presets. The new channel will start to play as soon as you stop pressing the CHANNEL Button.
•Only stored presets will be displayed, regardless of what bank they are stored in.
•Presets will be grouped and displayed by preset bank and number (ex.
Default Display | P.TUNE Display |
Sanyo
Preset Tuning List Mode
The P.TUNE Mode can also be viewed as a list showing Channel Name, Artist Name, or Song Title just like in the Channel List Mode:
1.Press and hold the BAND button to enter the Preset Tuning Mode (P.TUNE) (top right).
2.Press the DISP button for
•Pressing the DISP button while in this mode will change between Channel Name (right top), Artist Name (right middle), and Song Title list modes (right bottom).
•The name field will scroll only if the length of the artist or song title cannot be viewed in its entirety.
3.Use the CHANNEL Button to highlight the desired preset.
4.Push and release the SELECT Button to select the preset. The channel will change and the display will revert to the P.TUNE Display.
Sanyo
Preset Tuning Mode
P.TUNE
Channel Name
List Screen
P.TUNE
Artist Name
List Screen
P.TUNE
Song Title
List Screen
17
